Einleitung

Use this guide to replace the door light or LED light in your Whirlpool Refrigerator.

The door light illuminates the right side of the refrigerator. If the lighting in your refrigerator is dim or dark, then the door light might be broken.

This guide will work for most Whirlpool refrigerators. This guide is written with a model WRS315SDHW refrigerator. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.

  1. uZnovp3POltPPcNl
    uZnovp3POltPPcNl
    EEmEHtDyinkLLTC6
    NpS45AODrJVIyexU
    • Depending on your repair, open one or both doors.

  2. 6uWrGOmMRBj6V6ei
    6uWrGOmMRBj6V6ei
    JCNitWXZbbXDX1CL
    • Be careful during this step, as it's easy to scratch the interior of the fridge or crack cold and brittle plastic.

    • Carefully insert a flathead screwdriver, or a similar tool, between the door light and the chassis.

    • Pry up to separate the door light enough so you can grip it with your fingers.

  3. fG4kodvKysRt6Eu6
    fG4kodvKysRt6Eu6
    VLtlE5Paoy4OYOof
    JAoUCRq1nhCxLaWP
    • Tilt the door light downward to completely release its plastic clips.

    • Pull the light down to expose its connectors.

  4. nFsuHKDfwpKLbUXJ
    nFsuHKDfwpKLbUXJ
    11RNjL5dPKIDYu4i
    JpPOYnHXBKQCbFec
    • Disconnect any connectors attached to the door light.

    • Remove the door light.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

nicO Gurney

Mitglied seit: 14/04/15

8557 Reputation

Ein Kommentar

Hello Gents,

I have a Kitchen aid fridge Model # KRFF300ESS01 and one of the top Led light is flickering they come as a set module # W10897058, and connected by interconnecting wiring, (concealed in the panel) can any one please help me as to how I can change them out.....the other light is good and there is a screw which holds up the plastic panel housing the lights, can I get them out by removing the panel or do I get them out by taking them out one at a time and how do I get the wiring in like that .....cant post any pictures but will appreciate any feed back,

ashley demonte -