Wooden Deck Floorboard Replacement

Geschrieben von: Navdeep Singh
  • Kommentare: 0
Wooden Deck Floorboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

15 - 30 Minuten

Einleitung

An outdoor deck is a great space to spend your summer evenings with family and friends. Unfortunately, due to the wooden structure of an outdoor deck and the volatile weather that we experience during Canadian winters, wooden decks are prone to dry rot. Dry rot weakens the structure of wood and is caused by species of fungi that digest components of the wood which give it strength and stiffness. Dry rot compromises the structural integrity of your deck. Throughout this guide, I will explain the steps on how to identify and replace a deck floorboard that is subjected to dry rot.

  1. Gh1Ih1PYiaQuGYjr

    • Identify a floorboard that must be replaced.

    • Floorboards that have been damaged by dry rot are often soft and spongy. There may also be black fungus evident on the wood and any paint on the floorboard will have become damaged.

  2. UbOIxEOsprVTqbEk

    • Measure the length of the floorboard to determine the size of the replacement floorboard.

  3. mcDWCie5wUgtaefv
    mcDWCie5wUgtaefv
    BRedZnQHERxZDqXf

    • Place the end of your crowbar within the crack next to the floorboard and pry it out.

    • Caution: Ensure that you are wearing safety gloves, steel-toed boots, and safety glasses during this step to prevent injury.

  4. SPNw5fZPAPSIM6yg
    SPNw5fZPAPSIM6yg
    mtbOnTFtdtlhwDOy

    • Using a pen or pencil, mark your replacement board at the length determined during Step 2. Using a lumber saw, cut the replacement board to its desired size.

    • WARNING: Ensure that you are wearing safety glasses, and do not wear any loose fitting clothing, jewelry, or gloves during this step.

  5. viPyCDQWyROSpNdY
    viPyCDQWyROSpNdY
    JxK61BxfG6TgYpKy

    • Using a pen or pencil, make a marking to identify where the deck's support beams lie below the replacement board.

  6. FlnnLcVdbQc5ZfXp
    FlnnLcVdbQc5ZfXp
    WRRVSnAZM4oPWp2S

    • Using a hammer and wood nails, secure the replacement board to the support beams below.

    • For this specific replacement board, 3 x 2 1/2" wood nails were used to secure the board to each of the support beams.

Abschluss

You may repeat these steps for any additional floorboards.

Tinte & Feder

Navdeep Singh

Mitglied seit: 22/09/20

133 Reputation

0 Kommentare