WowWee CHiP Robot Dog Smart Watch Battery Replacement

Geschrieben von: Joseph Dantes
  • Kommentare: 4
WowWee CHiP Robot Dog Smart Watch Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

6 Minuten

Einleitung

  1. W2VOKcFWRIsrWtbs
    W2VOKcFWRIsrWtbs
    31VEcRSOC5pVCnUM

    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. PXNiIme6HEB5ODiW

    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

  3. WoipPKOSYHpnhgjs

    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

  4. jvsjoaRwqxElyxgq

    • Gently pull off the back side of the watch component.

  5. XISwYnpNeRJ5xDH1

    • Pull the battery and motherboard component out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Joseph Dantes

Mitglied seit: 02/10/18

502 Reputation

4 Kommentare

What batteries does the smart band use?

Yourmajesty100 -

Can be replaced by one of these and some soldering.

https://www.adafruit.com/product/1317

Alto -

This doesn’t detail sourcing the replacement or un-soldering then soldering the battery.

This is just “WowWee CHiP Robot Dog Smart Watch Battery Inspection” Not Replacement.

Alto -

But the discussion is under battery replacement

Daniel peters -