Einleitung

The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.

  1. iUngOsHkGDJuNdcg
    iUngOsHkGDJuNdcg
    mbPtI1McjuEwTSM2
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. NqkVBAHBS5kZHQNf
    NqkVBAHBS5kZHQNf
    GaoNIPBQABdnSmVg
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Moira Keahon

Mitglied seit: 24/09/14

257 Reputation

11 Kommentare

Its a programmer MIP not this kind.

Azariah Trumble -

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta -

does spare battery adapter vailable(not reachargeable)

coolboyz' channel -

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie -

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie -

Brand new Coder MIP - fully charged (approx. 20 hours charging time) after 5-7 minutes in use, it run out of battery already. Is this normal?

Barbe _74 -

Brand new Coder MiP (fully charged for approx. 20 hours) runs out of battery after only 5-7 minutes in use. Is this normal?

Barbe _74 -

Same CODER MIP here - we got erratic performance from the battery pack. A smart slap seems required to ensure a tight battery connection after a robot fall, otherwise it appears to have run out of battery. Not optimal, but it allowed us to play for a while.

dagmarfraser -

My Mip doesn’t work even if I replace the batteries. It acts very strange. It keeps making a clicking noise

Daniel Cleiland -

Mine does to

Clarrie O'HARE -

I have A Coder MiP instead of a plain MiP

Are there different instructions.

Clarrie O'HARE -