Xiaomi Redmi 2 Motherboard Replacement

Geschrieben von: Alicia Brenner
  • Kommentare: 22
Xiaomi Redmi 2 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

20 Minuten

Einleitung

Use this guide to remove the motherboard in your Xiaomi Redmi 2 for repair or replacement.

  1. Int1Q2xfsmTCKB2H
    Int1Q2xfsmTCKB2H
    XGAUFwKlmqOcYKiA

    • Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

    That's unnecessary. The cover itself has a small notch on it to remove it to the left

    Mad Max -

  2. hxtEJR1TXTjdwWBO

    • Insert your finger into the curved opening of the mid-frame.

    • Lift the battery and remove.

  3. 6GNqlnALgBcaBXZc

    • Remove the SIM and/or memory cards if present.

    • Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

  4. ZByFsitkO5DOwSDp

    • Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

  5. yIipI2PpWx3JCFX3

    • Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.

    • Keep this screw separate from the initial twelve.

  6. ubfYjSTT4DX2FTmM
    ubfYjSTT4DX2FTmM
    OJXWTJxxrWeKfZrZ

    • Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

  7. BFuWSRQDcKwwl2aS
    BFuWSRQDcKwwl2aS
    TIuP3DjNVtjJasKx

    • Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

    I broke the connector of this flat cable, which with a replacement part without having to change the entire mother board? Another doubt, this flat cable is responsible for which function in the cell?

    lucaslgf2 -

    pull up the black plastic part of this conector to free the ribbon before remove! this step is missing!!!!

    Rodrigo Cunha -

    Thanks Rodrigo, saved me!

    Rodrigo -

  8. oTdgpTPqSIyjr1Aj
    oTdgpTPqSIyjr1Aj
    DpPSbRiJJZXLIfN2

    • Lift and hinge the motherboard with your fingers.

  9. Rh3L12WbOotccf2T
    Rh3L12WbOotccf2T
    dLow3Oo4FMvTLH2p

    • Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

  10. eAuwtJ4NCVGpybqo
    eAuwtJ4NCVGpybqo
    EGRZYDV2teFKHVIC

    • Using the tweezers, pull the antenna connector from the motherboard.

    motherboard damage

    Rahul -

  11. YbMOZcRUOF6WDfdp

    • Lift the motherboard out of the front cover and set aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alicia Brenner

Mitglied seit: 01/10/15

3509 Reputation

17 Kommentare

this is very helpful

Ana -

hi brother mi phone was water damaged .it was not wrking i mean phone gets on but no display. phone gets ring and i can lift call and speak. when i connect to laptop i can access files in it. its get charging on connecting to charger

can u suggest me wat to do

please

asreefbashak -

may be LCD is damage. can fix it at 82877181 contact Peter for checking.

netman91 -

Hi bro I'm having redmi 2 mobile and it has a problem it is not taking any os it's having a compliant of not receiving os .....

There is any solution for that

Please give me reply bro any suggestions

jhon Carter -

Can i know the name of the motherboard used for redmi 2 prime 16GB,please tell me the name bro

Jakka Akhilesh -

how and where to buy motherboard for redmi2

DHANANJAY KALKOTE -

i want new mothe board redmi

ASHOK KUMAR -

i want redmi 2 prime mother board

ASHOK KUMAR -

How to buy redmi prime 2 mother bord

ANYTHING ANYBODY -

hey my Redmi 2 is not working, what can I do? it started to make turn off it self time by time and after it turn off completly, if I make to turn it it on not working, it makes vibration only without turn on, what can I do?? please help me because am just seeking a help

NIYIGENA Moses -

Sir, my phone (Redmi 2 prime) doesn't starts. One day it got off on 0% charge. I put it on charge but from the next day it was not opening. What to do?

Sagarnil Mukherjee -

My phones mother bord is damaged I needed it

mohan gowda -

pull up the black plastic part of this conector to free the ribbon before remove! this step is missing!!!!

Rodrigo Cunha -

My phone is mother board damage I need it

Rishikesh Meena -

Hello, i want ask for u, my handpone redmi 2 lte can’t on..why? What is problem?

sazuwan saz -

Great! This phone is very easy to disassembly!

Serg -

السلام عليكم

لدي جوال شاومي s2

منفذالشاحن خربان

Omar Halawane -