Yamaha NS‑AW190BL Damaged Wires Replacement

Geschrieben von: Roshal Robince

Kommentare: 1

Yamaha NS‑AW190BL Damaged Wires Replacement

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

10 Minuten

Einleitung

This guide explains the method to repair or replace damaged wires on the Yamaha NS‑AW190BL.

Werkzeuge

Schritt 1

Remove the six Phillips Head 1.2mm screws on the front side of the speaker.

AT THE BEGINNING OF THIS JOB YOU HAVE TO REMOVE THE METAL MESH SPEAKER GRILLE. How does the metal mesh speaker grille come off? You can’t do anything with these directions until that is accomplished.

This is a key FIRST step - you left off the FIRST STEP. This guide is seriously incomplete - its literally a non-starter.

clinton -

Schritt 2

Crack open both parts of the casing carefully.
Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.

Schritt 3

Remove the cooling foam.
Use a metal spudger to push the tab in on the red wire.
Repeat the process for the blue wire.

Schritt 4

The blue wire can now be removed from its connector.
Remove the red wire to free the rear casing.

Schritt 5

Use the metal spudger to bend down the metal tabs that hold the wires to the terminals. The tabs are small and in between the grooves of the terminal.