Yuneec ST10 Plus Battery Replacement

Geschrieben von: Justin Vega

Kommentare: 3

Schwierigkeitsgrad

Very easy

Schritte

Zeitaufwand

20 Sekunden

Einleitung

If you own a Yuneec ST10 Plus, there is a chance your battery will stop holding its charging capacity over time. The main causes of this issue are battery overheating, and the end of your battery charge/discharge cycles. Follow this step-by-step guide on how to replace your battery. No tools required and a quick replacement.

Schritt 1

Flip the controller upside down to access the battery compartment.
Grab the compartment door and pull down.

How should they remove the battery component door? Make sure to tell how, not just to do something. Also, why is battery capitalized?

Alex Watkins - 21/02/20

Schritt 2

Gently lift the blue tab connected to the battery in order to remove the battery from its housing.

Schritt 3

To disconnect the battery from the remote, grab the red and black connectors.
Pull gently on connectors until they disconnect.

Make sure to use commas after introductory phrases (e.g., to disconnect the battery from the remote, grab).

Alex Watkins - 21/02/20

The action part of the photo is a little obscured. I would retake this picture to have the action more highlighted. Also, add additional pictures to make the flipbook style iFixit prefers.

Alex Watkins - 21/02/20