ZTE Compel Speaker Replacement

Geschrieben von: Tayler McCleese
  • Kommentare: 0
ZTE Compel Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

This replacement guide will provide you with the necessary instructions to replace the speaker in the ZTE Compel. You may need to replace the speaker if there is no sound or if the sound quality is off.

  1. 1eQONudTsQdIVyOc

    • Place the phone on a flat surface with the screen facing down. This will allow easy access to the removable black plastic cover on the back of the phone.

  2. Fw3lBKeD3S5lQGNI

    • In the bottom right corner of the device, use your fingernail to remove the back cover of the phone by lifting up and holding the device with your other hand.

  3. DhPyKSMjQNak6Pop

    • In the top-right area of the battery, use your fingernail to lift the battery out of the phone.

    • If your battery is corroded, take all necessary precautions, such as, gloves and protective eyewear.

  4. WcOu5F6wh3uWy1Qv
    WcOu5F6wh3uWy1Qv
    k2YbEoqNMcPCS12S

    • Remove the 9 screws that measure 4 mm Phillips. Use your PH000 screwdriver attachment.

    • Use your iFixit Magnetic Project Mat to hold your removed screws while working on your ZTE Compel

  5. hADoNlpeCBinwWPs
    hADoNlpeCBinwWPs
    F2u1NJnjUVtYG1om
    YQOPrqk2HFUZIt2S

    • Insert the flat end of your black plastic spudger into the crease and work it around the entire circumference of the phone until the front and back are separated.

  6. Yh2DZqWUdRRWP4JI

    • The speaker is located in the top-left corner of the back plate. Using your tweezers, grip the sides of the speaker and pull it out.

    • Be cautious pulling the speaker out as it might move while pulling it due to adhesive wearing away.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tayler McCleese

Mitglied seit: 06/09/18

246 Reputation

0 Kommentare