ZTE Lever Motherboard Replacement

Geschrieben von: Luke Kilbourne
  • Kommentare: 1
ZTE Lever Motherboard Replacement

Schwierigkeitsgrad

Difficult

Schritte

20

Zeitaufwand

30 Minuten

Einleitung

Follow this guide to perform the replacement of the motherboard on a ZTE Lever smartphone.

  1. c3JqaLTXpJpmEGhN

    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

  2. ZUlMEHcKWY1BXqTM
    ZUlMEHcKWY1BXqTM
    Af5ZUELBMBXY2RMu

    • Use an iFixit opening tool to separate the back from the device.

  3. FIR2patmhFWAeDjW
    FIR2patmhFWAeDjW
    lbj3chyP52KxBshT

    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

  4. 4C4IK22ZrvyQbYfv
    4C4IK22ZrvyQbYfv
    LUMR1PyO3JpVkGjb

    • Disconnect the battery cable from the motherboard with a plastic opening tool.

  5. bKBbOqRBaiuVDpfI

    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

  6. GSeoxXwRNQYcYxs2

    • Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

  7. UfwVBcLXHwinrX3e
    UfwVBcLXHwinrX3e
    HU3uivDpTGktGNe2
    lOeQ5BlyIMQ6Es1o

    • Remove the top plastic motherboard cover using a plastic opening tool.

  8. M3OlJKLmUm3MMSAL
    M3OlJKLmUm3MMSAL
    fpIwNRMjfbNERAIc

    • Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

  9. VDWIym5OxByDqOj6
    VDWIym5OxByDqOj6
    fxEoKPrstQTX6w1I

    • Peel up the volume button cable from the phone with hands, or plastic opening tool.

  10. wJhSNcqpNYJbPoBw

    • Disconnect the power button from the motherboard with a plastic opening tool.

  11. p4UuFYnSYk5snSPh
    p4UuFYnSYk5snSPh
    bZLRcJgkyQwljaew

    • Peel the power button cable up from the phone with you hands, or a plastic opening tool.

  12. BpFbGxcS1X3mFUvU
    BpFbGxcS1X3mFUvU
    SGTANtYDS5kyAEVF

    • Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard.

  13. OqbNc46UekHosDUX

    • Remove the bottom plastic motherboard cover with your fingers

  14. HBJAbaemL6rDCVZj
    HBJAbaemL6rDCVZj
    ehWWY6dDDUHYQQOw

    • Disconnect the camera from the motherboard with a plastic opening tool.

  15. OCi1sIWKEKKsvZVv

    • Disconnect the display cable from the motherboard with a plastic opening tool.

  16. vKQ1dwxHOxIpEZaG
    vKQ1dwxHOxIpEZaG
    1PTTQoSCMwvH5iRM
    mge6EngkN53Q3Kkv

    • Disconnect the camera from the motherboard with a plastic opening tool.

  17. nyxvaUMDLQclPJG4

    • Disconnect the rear speaker cable from the motherboard with a plastic opening tool.

  18. y2v5MBeiBLStwONn

    • Pry the motherboard cell battery from its position on the case of the phone

  19. jq5BuHZwolruq24B
    jq5BuHZwolruq24B
    wbYhhastGx4AHmRU
    KhYXJjgRGYZSZZWb

    • Using the plastic opening tool, pry the motherboard up, sliding along the edge to separate the pieces.

  20. KyghCOnnJ4ClKL3L

    • Remove the motherboard with your fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Luke Kilbourne

Mitglied seit: 29/01/18

294 Reputation

Ein Kommentar

Those are excellent instructions but I need to know where at on the motherboard is the internal memory storage cuz my phone is so screwed up that it won't charge or turn on or anything lol,so I got a different phone n got my SD card out of the ZTE n put in my new phone and there are some pics that I really need,but I was wondering if there was any way possible that I could put the SD card back in the ZTE motherboard and some how move the pics onto my SD card so I can have them on my new phone.This is killing my brain on trying to think of ways to succeed n can't please get back to me,,,thanks.

-ROGER-

Roger Knight -