Zippo Lighter Felt Pad and Cotton Replacement

Geschrieben von: Dara
  • Kommentare: 2
Zippo Lighter Felt Pad and Cotton Replacement

Schwierigkeitsgrad

Easy

Schritte

9

Zeitaufwand

15 - 30 Minuten

Einleitung

This guide will show you how to replace the felt pad and cotton inside any model of a Zippo lighter. Use this guide when you feel like your lighter has shorter fuel life than it had before. Replacing the cotton and the felt pad helps with evaporation and fuel flow, and it provides a longer fuel life. Try to replace the cotton every four months if you use your Zippo as your daily lighter.

Before getting started, purchase a felt pad and cotton pack originally made by Zippo.

If you have fueled your lighter with lighter fluid recently, do not use your lighter for a week and let the cotton absorb all the fuel. Therefore, when you want to do the replacement it will be dry.

  1. jGWGlFHZ5JST6Gap
    jGWGlFHZ5JST6Gap
    LJOtKL4YVwkvWehY
    WOPlXt1QBcB4Rqrb

    • Open the lid of the lighter.

    • Hold the bottom of the lighter’s case and pull out the metal container.

    • Set the case aside for now.

  2. Fm2Fo2ee4SRQjnRN
    Fm2Fo2ee4SRQjnRN
    ZFaoXdJLLuF1ASBB

    • Turn the metal container upside down with the bottom facing you.

    • You should see a piece of white felt with the words “Lift to fill.”

  3. DIGcCaVuiNHVpUhm
    DIGcCaVuiNHVpUhm
    MEMmR15PpWI1DSW2

    • Loosen the screw with a flathead screwdriver.

    • There is a spring behind the screw, so make sure you are unscrewing slowly and gently.

    • Remove the screw with the spring and the flint attached to it.

  4. GNVVLuCMZInRcUFw
    GNVVLuCMZInRcUFw
    CAVujEYh6Yvmp2tI

    • Lift the felt pad up and out of the metal container using a pair of tweezers.

  5. EDe1qxA4GmJuBe5I
    EDe1qxA4GmJuBe5I
    MxGOCOYQeUhcml2l

    • Use a pair of tweezers to remove the old cotton from the inside.

    • When adding new cotton, it should fully cover the inside of the metal canister.

    • Throw the old felt and cotton in the garbage.

  6. IlUhxF4w2VPpxAkI
    IlUhxF4w2VPpxAkI
    aGPgMnsxpYQtEnDP
    IXWRQk1hPgTxjFV6

    • Use a pair of tweezers to push each cotton piece on top of the wick inside the metal container. Make sure the cotton pieces cover all the sides.

  7. so1VS5SUwObEibKN

    • Use a pair of tweezers to place the new felt pad on top of the cotton pieces.

  8. AHJCbMiAatprJLAN
    AHJCbMiAatprJLAN
    NKcqooKDbYBJZEOC

    • Replace the flint and screw it back into place using a flathead screwdriver.

  9. Fg3AniMMT5xfNjcX
    Fg3AniMMT5xfNjcX
    JU1Shh1rLYMGCCty

    • Refuel your lighter, put the metal container back inside the case, and test out the lighter.

    • Only use the lighter when it is secured inside the case.

    When you repack a Zippo you actually want to make sure that you snake the wick in between every piece of cotton until the wit comes all the way to the bottom of the metal case but you want to be careful not to pinch the wick at any point especially up near the chimney where it comes out to be lit. Let the wick should snag all the way through the metal case to ensure it absorbs all the liquid from all the cotton. It will last a whole lot longer between refills.

    Edward Vaughn Wahner -

    If you want to know the very best way to repack the cotton in your Zippo I would watch this video from this guy who really knows his stuff when it comes to Zippo lighters.

    https://youtu.be/QKHgsNUFzOw

    Edward Vaughn Wahner -

Tinte & Feder

Dara

Mitglied seit: 01/10/21

169 Reputation

0 Kommentare