Einleitung
The requirements for this guide are the right tools and the device itself. The casing should be removed when trying to access the internal components of the recorder.
-
-
Place device face up and pry off the four knobs using the flat end of the plastic opening tool.
-
-
-
With device facedown, lift the four rubber feet from the device using tweezers or fingernails.
-
-
-
With device still facedown, unscrew six (PH #1), 9mm screws; two located in center of back side of device right above the battery cover, and four under the rubber feet.
-
-
-
With the bottom of the device on a table, lift the top of the device and gently place it aside.
-
To reassemble your device, follow these instructions in reverse order.
6 Kommentare
Where can I get the replacement part. I need to change the casing of my h6 and the power button
Dray -
Did you get to find the replacement casing? Where did you find it?
I need a case replacement, too. There is so much broken, hardly to fix with glue …
anything?
Has anybody found a source for Zoom parts? I would sure like to fix my UAC-8, but parts don’t seem to be available anywhere. It is kind of frustrating, the fix would be easy as heck, but not without parts.