Einleitung
Internal Prerequisite.
Werkzeuge
-
-
Remove the pieces of readily removable tape from around the perimeter of the display.
-
Carefully remove the aluminum tape covering the display data cable connection.
-
-
-
Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display.
-
Use the tip of a spudger to remove the small washer under the screw you just removed.
-
-
-
Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).
-
Abschluss
To reassemble your device, follow these instructions in reverse order.