iBook G4 14" 933 MHz-1.33 GHz LCD Cover Replacement

Geschrieben von: Andrew Bookholt
  • Kommentare: 0
iBook G4 14" 933 MHz-1.33 GHz LCD Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

Keine Schätzung

Einleitung

This is an internal prerequisite guide that should remain unpublished.

  1. Wethul6AVyi5ObGR
    Wethul6AVyi5ObGR
    uPxZKIEoqOMY5GNI

    • Remove the pieces of readily removable tape from around the perimeter of the display.

    • Carefully remove the aluminum tape covering the display data cable connection.

  2. RD1tb6sR31wKXFUZ
    RD1tb6sR31wKXFUZ
    RFSfm1QtnIoasp6i

    • Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display.

    • Use the tip of a spudger to remove the small washer under the screw you just removed.

  3. DnCKEjjkcIBHATfH

    • Peel the aluminum/EMI tape off the cast aluminum frame of the clutch hinges.

    • It is not necessary to peel the tape off the thin steel LCD cover.

  4. 1lfV1qWtCk2E2Qnm
    1lfV1qWtCk2E2Qnm
    IYAQ6s6Ysx1hpXh2

    • Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).

  5. BDTWI3nvkn2r2XFD

    • Lift the thin steel LCD cover off the LCD.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew Bookholt

578335 Reputation

0 Kommentare