Einleitung
Plug your soldering iron in on the highest setting for later steps. This is a easy to intermediate level guide that requires a knowledge of soldering.
Werkzeuge
Ersatzteile
-
-
Use a fingernail, or a plastic opening tool to gently pry the black panel around the portholes.
-
-
-
Use your fingers to pry the rest of the back off; slowly apply pressure from each side to break each clip connection.
-
-
-
Once the back is off, position the tablet as shown and be sure to warm your soldering iron.
-
-
-
Grip the new microphone with tweezers and place in the slot.
-
Solder the new connections while using tweezers to hold the speaker steady.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
