iHome iP1 Buttons Replacement

Geschrieben von: Wen Sullivan
  • Kommentare: 2
iHome iP1 Buttons Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

3 Minuten

Einleitung

Use this guide to replace your iHome iP1's damaged or faulty command buttons. These buttons are located on the front of the iPod/iPhone dock and are used pause/play music and change the volume of the speakers.

  1. bqAqO2UVhS1V6oSY

    • Orient the iHome upside down with the speakers facing you.

  2. SAfJYpqNEEvHffkk

    • Remove the two 9.5 mm Phillips #1 screws from the dock cover.

  3. clasPMMh21UMWYU4
    clasPMMh21UMWYU4
    NpOHZqEAjSmCLKcZ
    FOsaJjXOGWF1KPTT

    • Remove the dock cover by grabbing its sides and pulling it up and away from the faceplate.

    Where can I buy this part

    Soude Alibabaie -

  4. vHQaRkqNhIooHwX5
    vHQaRkqNhIooHwX5
    6LJkNrtIXm3yluwH

    • Disconnect the silver ribbon cable on the left-hand side by pulling away from the command buttons.

  5. FC2dHyVswhLp1bVt
    FC2dHyVswhLp1bVt
    y6qdXxoPNlA2Eotj
    yGJAqjaVPuDBdLwU

    • Remove the command buttons by pulling the small black panel containing them downward and away from the faceplate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Wen Sullivan

Mitglied seit: 06/10/16

518 Reputation

Ein Kommentar

Where can I buy the button PCB

David Ivar -