Einleitung
Use this guide to replace the buttons (alarm, hour, minute, power, play/pause, and volume) on the top of the iHome.
-
-
Unscrew the four 13mm Phillips #1 screws, located in the 4 indented holes on the back of the iHome.
-
-
-
Pull front cover directly out and away from iHome base.
-
Pulling firmly should detach the cable on the bottom right. If not, use the tweezers to firmly pull the cable out of its socket.
-
-
-
Lay the front cover face down.
-
Pinch the cable on the left and firmly pull it out of its socket.
-
-
-
Pinching the speaker with your thumb and pointer finger, pull it firmly down and out, away from the housing.
-
If the speaker is difficult to pull out, push down on the buttons from the top to help loosen it.
-
-
-
Remove the four 8mm Phillips #0 screws from the top of the speaker.
-
Remove the two rows of buttons and replace.
-
To reassemble your device, follow these instructions in reverse order.
