iMac G4 15" 700 MHz EMC 1873 AirPort Card Replacement

Geschrieben von: Lilly
  • Kommentare: 3
iMac G4 15" 700 MHz EMC 1873 AirPort Card Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 - 10 Minuten

Einleitung

This step will help you connect to wireless internet and get you back to surfing the internet faster than before. You can add a AirPort to your computer even if it did not originally come with one.

  1. 4jJrvi3V6TNMBs42
    4jJrvi3V6TNMBs42
    QLD1m4TD1tq5JCbX

    • Place the computer monitor face down on a safe, harmless surface.

    • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

  2. YUwWf1jcj4Uw3TGN

    • Remove the metal plate from bottom of the iMac G4.

    • The four screws do not completely separate from the metal plate.

  3. wnURJKBL3XjTH1We

    • Use a spudger to lift and remove the AirPort's antenna connector.

    • This step is only applicable to iMacs that came with an AirPort card installed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Lilly

Mitglied seit: 11/10/11

632 Reputation

3 Kommentare

Make sure to insert the AirPort Card with the label facing down, away from you.

Nathan Larsen -

Does the antennae cable not plug into the card - Your illustration shows a large cable simply taped on top of the card and, as far as I can see, a smaller thinner cable that appears to be going to the card. I have the bigger cable in my iMac but it dues not appear to fit into the card - Do Inhave the wrong card or something?

roger -

The big cable plugs into the card. The little cable is a drawing on the iMac to show you how the cable should go. You are right, Step 3 does show the cable on top of the card, not plugged into it.

Dave -