iMac Intel 20" EMC 2105 and 2118 Lower EMI Shield Replacement

Geschrieben von: Walter Galan

Kommentare: 2

iMac Intel 20" EMC 2105 and 2118 Lower EMI Shield Replacement

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

Keine Schätzung

Einleitung

Schritt 1

Peel up the lower EMI shield from the rear case.
It is only necessary to peel the shield up from three sides. Leave it attached to the display.
If you happen to rip the EMI shield, use a piece of foil tape to cover the tear.

Schritt 2

Tape the EMI shield to the face of the display to keep it out of the way.

I didn't see the need to tape the foil to the display (and I didn't want to get any sticky residue on the screen), so I skipped this bit with no problems.

Bob -

Zitat von Bob:

I didn't see the need to tape the foil to the display (and I didn't want to get any sticky residue on the screen), so I skipped this bit with no problems.

I agree, and tape doesn't stick to the screen (I tried and the tape came loose before I was done)

Wizbang FL -