iPhone 5 Lautstärkeregler kurz ersetzen

Geschrieben von: Andrew Optimus Goldheart

Kommentare: 10

Schwierigkeitsgrad

Mittel

Schritte

Zeitaufwand

Keine Schätzung

Einleitung

Werkzeuge

Kreuzschlitz PH00 Schraubendreher

Schritt 1

Entferne die folgenden Schrauben, welche die Vibrationsbügel und den -motor am hinteren Gehäuse befestigen:
Eine 2,3 mm Kreuzschlitzschraube
Eine 1,7 mm Kreuzschlitzschraube
Eine 1,6 mm Kreuzschlitzschraube oben im hinteren Gehäuse

How do I remove the 1.6mm screw?

Alexei - 05/12/19

Schritt 2

Entferne den Vibratorbügel und den -motor vom hinteren Gehäuse.

Make sure you have removed all 3 screws connected to the vibrator since the bracket is welded on the motor house.

Johnny -

Schritt 3

Entferne die folgenden Schrauben, welche die Lautstärketaste und die Bügel des Stummschalters an der Seitenwand des hinteren Gehäuses befestigen:
Eine 1,5 mm Kreuzschlitzschraube
Zwei 1,8 mm Kreuzschlitzschrauben

The middle one 1,8 = 1,2 mm

Daniel Mone - 02/05/14

yes, it is like you say

[Ados Production] - 18/09/17

I can't remove the top screw for some reason, should it be any different from the rest?

arnaudjb - 04/06/15

When reassembled I noticed that when I firmly tightened these two screws tagged with orange circle , my ringer switch was stuck and didn't move. So I left these two screws little loose and ringer switch worked fine. Now I have used my phone couple weeks and there has been no problem with these loose screws.

Asko Pesola - 18/03/16

on my device the red circled screw is completely different. Under my magnifying glass the head is round. Don’t know how to unscrew. There is no fitting bit in my ifixit Pro Tech Toolkit. :(

Michael Kühnen - 04/01/18

When re-assembling these parts, make sure that the volume bracket is inserted UNDERNEATH the ringer switch bracket, or the + volume button will not make positive contact with the switch on the cable.

tinkertoy -

Schritt 4

Heble mit der Spitze eines Spudgers den Bügel des Stummschalters von der Seitenwand des hinteren Gehäuses.
Entferne den Stummschalter.

I didn't see mention of it, but I found the ringer switch button would slide down to OFF during reassembly, so I made sure the new ringer switch was also set to OFF before screwing all back together.

Dean M - 08/08/14

I found removing the hinge that secures the power button to require more force than I thought necessary. Seemed to be the most difficult part of the repair. When installing the new AC/PB cable, i started with this assembly and worked backwards. Would have been helpful to include a good set of tweezers in the repair kits for those with fat fingers like mine or who don't have a pair at home.

aroclobama - 10/01/16