iRobot Roomba 655 Pet Series Battery Replacement

Geschrieben von: Matt Davis
  • Kommentare: 0
iRobot Roomba 655 Pet Series Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

10 Minuten

Einleitung

Removing the battery is an important step because it takes away the power from the device so you don't harm any of the other components. It should be one of the first things you should do.

  1. Y4vNLlBTim6BWvEX
    Y4vNLlBTim6BWvEX
    WRZPOSRSYumGNJpW

    • Flip the device over onto its back.

    • Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.

    • This screw doesn't completely come out of the yellow side brush.

  2. D3KfKxsb6CYEpcWF
    D3KfKxsb6CYEpcWF
    6HPlBJvGEeYFFLtG

    • Using a Phillips #1 screwdriver, remove the four screws on the back panel.

    • Once the screws are loose gently pry the back plate away from the body by using the spudger tool.

    • The screws don't completely come out of the panel, but it will still come apart once unscrewed.

  3. KpmRBYELbX1OgKQf
    KpmRBYELbX1OgKQf
    pegmFTOivKNLVMCC
    QZoEVoCmjj3y6P1X

    • Grab the two pieces of green tape with your thumb and index finger

    • Pull up on the battery in an upwards direction to remove it

  4. RySTRJmqhVhE2KmS
    RySTRJmqhVhE2KmS
    vBmpAtd2NDiJ1KFS

    • These are the contact points on the Roomba for the battery

    • These are the contact points on the battery

    • If these contact points are dirty, they can be cleaned with a moist microfiber cloth (distilled water recommended)

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Matt Davis

Mitglied seit: 22/01/15

1609 Reputation

0 Kommentare