Dräger Vamos Repair

The Dräger Vamos® / Vamos® plus is a small lightweight anesthetic gas monitor produced by Dräger, an international medical company founded in Germany 1889. The device is responsible for displaying the concentration of gases that are used in operations where the patient requires anesthetics. Carbon dioxide, nitrous oxide, and volatile anesthetic gas concentrations are the gases that the device measures, monitors, and displays.

The Dräger Vamos® / Vamos® plus can be identified by its name that is imprinted on the bottom left of the device. If there is no imprint due to any reason, the screen of the device begins about ¼ front the left and takes up about ⅔ of the surface. The location of the control knob is near the bottom right corner of the display screen and towards the right of the power indicator.

• Weight
  • 1.6 kg (3.5 lbs.) without battery
  • 2.1 kg (4.6 lbs.) with battery
• Dimensions (H x W x D)
  • 16.6 cm x 24.0 cm x 16.5 cm (6.5 in x 9.5 in x 6.5 in)
• Mains power supply
  • 100 to 240 V ~ 50/60 Hz
• Maximum power consumption
  • during warm-up
    • 45 W
  • during operation
    • / 35 W
  • on standby
    • 28 W
• Operating time with battery (optional
  • > 60 min
• Sample flow rate
  • 200 ± 20 ml/min
• Interface
  • 1x RS 232 (MEDIBUS protocol)

• Temperature
  • 10 to 40 °C (50 to 104 °F)
• Atmospheric pressure
  • 620 to 1,100 hPa (9.0 to 15.9 psi)
• Altitude
  • up to 4,000 m (13,123 ft.)

Vamos® / Vamos® plus Anaesthetic Gas Monitors. Drägerwerk AG & Co. KGaA, 2018.

Drager Vamos/Vamos Plus Official Page: The official product page of the Dräger Vamos® / Vamos® plus.

Drager Vamos/Vamos Plus Features: The manufacturer’s PDF about the features that the device possesses.

++MedicalExpo Drager Vamos Product Page:++ A product page from an online medical marketplace for the Dräger Vamos® which includes two PDFs that are free to access.