5 LED 6 Mode Rear Bike Light Teardown

Geschrieben von: Alex Sireci
Veröffentlicht: 20/11/15
  • Kommentare: 0

5 LED 6 Mode Rear Bike Light Teardown

Veröffentlicht: 20/11/15

Teardown

Einleitung

The bike light in this guide is sold under various brand names, but in fact is a no-name brand and comes with no distinct markings on the packaging. Some uses for this guide are dead batteries or a broken clip.

  1. VFaG61RI5xttU2cE

    • Obtain the necessary tools

  2. OiENyE5wMHigvUMp
    OiENyE5wMHigvUMp
    EnOdUclUYQqcvqPW

    • Insert coin or any flat object into edge of light cover

    • Pry open until cover loosens

  3. qfe3kSQRlHcX2XWI
    qfe3kSQRlHcX2XWI
    YwuUkUxZhXNI1bPs

    • Remove the single Phillips #00 screw holding the circuit board in place

    • Remove both AAA batteries

  4. qEYJRqxrfJQHtF3A
    qEYJRqxrfJQHtF3A
    GPZEbS2ADUmK3GyG

    • Remove both Phillips #00 screws holding the clip in place

    • Remove the clip with a flat object

    • The button will fall out when removing the clip. Do not lose it!

  5. XBQnlsRA2NQwerGD

    • Congratulations! You completed your device teardown!

Tinte & Feder

Alex Sireci

Mitglied seit: 30/09/13

100 Reputation

0 Kommentare