ACEPC AK2 (AK1 V6.0) Teardown

Geschrieben von: Alex Barblexi
Veröffentlicht: 15/08/22
  • Kommentare: 0

ACEPC AK2 (AK1 V6.0) Teardown

Veröffentlicht: 15/08/22

Teardown

Einleitung

This is the ACEPC AK2 and on the Mainboard you can read AK1 V6.0.

  1. S6BbMlifaSTYxuSp

    • You only need the screwdriver if there is a screw in the red circle. I used the screwdriver to show you how the lid is fit.

    • Remove the power adapter

    • Slide the release button to the right.

    • Now you can lift the top and put it to the side.

  2. JTqWwtLOYO3ibSiS
    JTqWwtLOYO3ibSiS
    FKAs2xpPGCMVt4vw
    KNQxP63WvkcOqMwB

    • Release the screws of the frame.

    • You can release the screws of the drive frame ...

    • ... or leave the screws in place and pull off the black tape.

    • You need the longer screwdriver for some screws

  3. UhJwSrFVEMjOptBD

    • Now release the screws in the orange sircles.

    • Better release the screws on the LED board.

    • slide the board a little bit away from the outer connectors and pull it up.

    • Please dont break the walls.

    • The battery gives the board a little bit electric power. Please dont get a electric shock.

    • Please be carefull to dont break the antenna!

Tinte & Feder

Alex Barblexi

Mitglied seit: 12/03/19

193 Reputation

0 Kommentare