HP Compaq 6000 Small Form Factor Teardown

Geschrieben von: Ethan Eimont
Veröffentlicht: 14/02/23
  • Kommentare: 0

HP Compaq 6000 Small Form Factor Teardown

Veröffentlicht: 14/02/23

Teardown

Einleitung

    • Use the latch on the side panel to open it

    • Make sure you open the panel, pulling up and pulling towards your self as shown in the pictures

    • Removing drives is easy, just pull the drive bay up and you can access them

    • Fallow the next step if your hard drive is the OEM hard drive, it has a different placement (under the power supply.

    • Be carful around the SATA cables so you don't cut them!!!

    • You may now remove / replace any disks in the shown area

    • Lift the power supply up in the direction of the green arrow

    • Remember !!!!ALWAYS UNPLUG YOUR DEVICE BEFORE OPENING!!!!!!!

    • Just disconnect the cables going to the floppy, cd/dvd, and hard drive. (: Great Job so far

    • Be carful around wires (Don't cut or damage)

    • Just go slow and take your time (;

    • CAUTION (There are 2 screws on both sides of the DVD/CD drive)

Tinte & Feder

Ethan Eimont

Mitglied seit: 15/11/22

1 Reputation

0 Kommentare