Einleitung
Werkzeuge
-
-
The tools you need are something to pry the frame open and two screw drivers one philip and one security torx
-
-
-
Then unscrew the 7 screws that are around the frame of the phone and don't forget the one screw thats in the middle
-
-
-
Then your going to take the battery outbid gently pulling upward on the wires that is connected to the white piece of plastic
-
-
-
then you going to take the the strip on the left hand side of the phone and pull it out with you fingers
-
-
-
then you take out the strip that is on the right side of the strip u just took out. (Use fingers)
-
-
-
Then you then you pick up the top phone chip and go to the bottom of it to take out the black strip which is the last one.
-
-
-
then take the bottom rectangle chip and take it out with the top square chip keep the black wire on the chips cause its hard to put back on
-