RedOctane X-Plorer Teardown

Geschrieben von: Jackson Poer
Veröffentlicht: 19/11/18
  • Kommentare: 1

RedOctane X-Plorer Teardown

Veröffentlicht: 19/11/18

Teardown

Einleitung

The screws could be torx or Philips head in the body and where the neck bolts to the body.

  1. AnqM2mR1ojvsqHU3

    • Remove all 16 #10-torx screws from the back side of the case.

    • Gently separate the case pieces.

    • A strong magnet helps greatly when taking out the screws.

    • Keep in mind when resembling, the case is plastic so, don't tighten the screws too tight.

  2. UKm5mEtwFpBvFYM2

    • Unscrew the 4 #10-torx screws.

  3. TEgcFKlsxZYVPHAo
    TEgcFKlsxZYVPHAo
    KViTGrfXkZjerDRt
    MWUluqUQVpKTSRmn

    • Unscrew the 2 Philips head screws

    • Peel off the pads.

    • Push the colored keys out from the other side.

  4. QgN2aa1AHKxME6mP
    QgN2aa1AHKxME6mP
    i5ltfbkqmb3iQbsk
    PWqmDbiI4uFihbEk

    • Unscrew the red screws and pull the board out.

    • Then, unscrew the blue screws

    • Pull the bracket things off.

    • Pull out the pin.

  5. dMhYKJtsseag1UV5

    • Unscrew the 4 Philips head screws.

  6. VX25THxpEjfKKdJk

    • Unscrew these 2 Philips head screws.

  7. yHT6JatRw32Qx1oN
    yHT6JatRw32Qx1oN
    di2osYqCOfqHHUcK

    • Push from the other side until it comes out.

    • Take the spring off with the connector

  8. iNBbD6OHF4rOfgsA
    iNBbD6OHF4rOfgsA
    iDMGvLUYSWLJatHh

    • Unscrew the 4 Philips head screws.

    • Peel off the contact pads.

Tinte & Feder

Jackson Poer

Mitglied seit: 08/04/17

671 Reputation

Ein Kommentar

"unused port" is for a footpedal switch,not positive but believe all GH style guitars have one

Valden Tharbosen -