Einleitung

A look inside the Samsung Jitterbug.

  1. LE6DeCBBXKBpdaNZ
    LE6DeCBBXKBpdaNZ
    ljibxpQPEPutv56A
    IW11rYOq2WL4OIHW
    • First remove the battery and rubber feet from base and under phone number inside.

    • Undo all six screws. Only the two under the battery will come out fully.

  2. 4I1mUISPQqF1aSSp
    4I1mUISPQqF1aSSp
    Yn2RXtGwVhlEOofZ
    • Pop the six clips indicated in green and remove back. I removed the two on the sides first, but it was a huge pain to open the rest of the way. I suggest starting from the top four.

    • Blue is the connector to the screen and speaker board in the top of the phone.

    • Purple is the chip and orange is charging port.

    • The opposite side of the board (not pictured) has the microphone on it, it's a small black round bump on the bottom.

  3. bk11xOmtUP6RqHcC
    bk11xOmtUP6RqHcC
    TaTd6shkREMTJul6
    IrXPDLtPFYOLoiF2
    • Unhook screen connector and pop out board (just put a screwdriver under and pop).

    • Peel off button pad.

  4. JbxlU6dYEsSXAZJ4
    JbxlU6dYEsSXAZJ4
    uLhRZuf1qXmIB5JS
    ickniL5ElHlZutmY
    • Remove rubber front, then turn over.

    • Pop all five clips. Start at the top near the hinge and work down.

  5. ssLj33jC6nwRAoyj
    ssLj33jC6nwRAoyj
    nq32VEI5AMo5L2MA
    QcbgtwuLIdhFlyZv
    • Blue is main screen and mini screen board. Green is button and underneath is the main speaker. Purple is

    • Pop out all pieces. Be careful not to break the cabling connecting the outer bits to the board.

Kari Fox

Mitglied seit: 24/06/13

125 Reputation

0 Kommentare