Start by removing the back of the phone. Once that is done you will find 4 Phillips 00 screws two on the top left and right and two on the bottom left and right

Take out the battery

You will see 4 phillips 00 screws, two on the top left and right and two on the bottom left and right. Remove them.

Take the Jimmy and go around the sides of the phone until the outer border comes off.

Push gently on the side of the screen cable with a Spudger to release

Then remove the logic board.

Take the keyboard out by pulling gently on the side with some tweezers

Remove the two black screw covers on the bottom of the screen

Remove the two screws that are revealed

Take a Jimmy and go around it until the front case (the one with the smaller screen) comes off.

After you are done with step six the phone should look like this

Take a Spudger and push up on the little black bar at the top end of the screen to logic board cable

Take a Spudger and push up the little red bar over the camera cable.

Pull the cable out and remove the camera.

Take a pair of tweezers and lift up to remove the screen.

Congrats! Your done. Let's take a look at what we have.

Outer cases

Screens

Logic board

A camera

Some button covers

A battery

A keypad cover