Sandisk Sansa m230 Series mp3 player Teardown

Geschrieben von: James Thorne
Veröffentlicht: 17/12/13
  • Kommentare: 0

Sandisk Sansa m230 Series mp3 player Teardown

Veröffentlicht: 17/12/13

Teardown

Einleitung

Follow the steps in this guide in order to gain access to components found inside the device which most often require repair of replacement.

  1. UyPItYVvKFIkOVBX

    • Remove the battery compartment cover.

    • Remove the battery.

  2. SMFxEv5NWyRVrWXQ

    • Locate and remove the screw next to the battery compartment lid.

  3. UwaiNMLyglrfXhGb

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

  4. anNXVYYrKvmuZ1vv

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

  5. OLGMtTNU2pjUjTLH

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

  6. Eiog1RsVGe3Fakc5

    • You now have access to all components found on the inside of the device!

Tinte & Feder

James Thorne

Mitglied seit: 05/11/13

638 Reputation

0 Kommentare