Einleitung

Wenn dein Funkschlüssel nur sporadisch oder gar nicht mehr funktioniert, dann ist es an der Zeit die Batterie auszutauschen.

Folge der Video-Anleitung von NutzAboutBolts, um den Austausch selbst durchzuführen.

Abschluss

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

eCuration

Mitglied seit: 19/05/17

450352 Reputation

6 Kommentare

Thanks! So easy and just what I needed to know.

Melodie Mangers -

I did that & my fob still isn't working. Does it need to be reset?

Thanks in advance

Debbie

Deborah Garza -

You need a 2032 battery not 2016

lordbob75 -

The battery in the vid clearly shows "CR 2016."

Steffi Kaizun (Skaizun) -

You don't need your fingernail to separate the clear and black pieces. At about the 54 second mark, a white tab is visible at the right (short) end of the piece. GENTLY push a jeweler's flathead screwdriver into it until you feel the clear and black pieces separating. You can do the rest with your fingernail. Use the same screwdriver between the copper battery holder and the battery to lift it out, then stick the new one into the copper holder, then push down as you push toward the copper holder to set the new battery. Keep in mind that while you're replacing the battery, you may be pushing the buttons, so, make sure to test the fob from at least 10 feet away: (1) Make sure the trunk is closed; if not, close it, manually; then, open it with the remote, then close it, manually. (2) test the door lock buttons. (3) test the alarm.

Steffi Kaizun (Skaizun) -

This is wrong, the 2012 key fob requires a 2032 battery. I don’t care what Steffi Kaizun (Skaizun) says, she clearly lacks basic observational awareness, assuming she even changed the battery herself. Please fix these instructions

Albert Eistein -