Alcatel Go Flip 3 Keypad Replacement

Geschrieben von: Gustavo Cornier
  • Kommentare: 0
Alcatel Go Flip 3 Keypad Replacement

Schwierigkeitsgrad

Difficult

Schritte

7

Zeitaufwand

9 - 15 minutes

Einleitung

In order to replace the number pad on the Alcatel Go Flip 3 you need to follow the steps from our "motherboard replacement" guide.

  1. sv2PFTOsYVWUllS1

    • Place a fingernail or opening tool into the notch on the back panel of the phone.

    • Pry upwards to remove the back panel.

  2. vSE3ASgBlixRiiIp

    • Remove the battery by lifting it up from the small indent.

  3. A6SlRRrYGJZgOqFT

    • Remove the nine 1 mm screws from the midframe using a Phillips #00 screwdriver.

  4. Zt5R6KVR5VOwfs65
    Zt5R6KVR5VOwfs65
    a1XWN5WcGXeREBDa

    • Use a spudger to pry the midframe away from the phone.

  5. NYe1tkY51nDUsXt4
    NYe1tkY51nDUsXt4
    1VPcFpBXEYGjcPNU

    • Use a spudger to disconnect the video cable from the motherboard.

    • Make sure not to damage the video cable when disconnecting it from the motherboard. Hold it up correctly.

  6. L5SHBEdrKQhI1P2O
    L5SHBEdrKQhI1P2O
    cEeDT2sHKDUK5o1g

    • Use a spudger to pry the motherboard out of the phone.

  7. rSNsVqQMuDiVPOGY

    • Grab one corner of the number pad and lift up to remove it from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Gustavo Cornier

Mitglied seit: 09/09/25

375 Reputation

0 Kommentare