Disassembling Nano 7/LINK (D-P Serial)

Geschrieben von: Kaffelogic
  • Kommentare: 0
Disassembling Nano 7/LINK (D-P Serial)

Schwierigkeitsgrad

Very easy

Schritte

5

Zeitaufwand

5 - 10 minutes

Einleitung

Removing the panelwork on any Kaffelogic Nano or Nucleus Link coffee roaster with a D or P prefix serial number.

  1. bEdI12xSfVQDKaCd
    bEdI12xSfVQDKaCd
    keWYfIuvFMvyWLWV

    • Remove the 6x 2.5mm Hex screws on the left and right side of the roaster.

    • Take care not to damage the buttons while maneuvering the front panel, with all six screws removed it may fall away.

  2. MhQ4bjGDjKieVDbY
    MhQ4bjGDjKieVDbY
    Nqrlq6TYIlRCEmPp

    • Hold the front panel steady while removing the plastic top/closure.

  3. JttMZ1MrHIv3w14y

    • Pull away the front panel carefully.

  4. xlnoDyLNHUxvifcH
    xlnoDyLNHUxvifcH
    BA3QijfXOOId6nAg
    3OUB1gVyYEkIiqKS

    • Remove the last 2.5mm Hex screw securing the rear panel.

    • Pull up on the rear panel to remove it from the roaster.

  5. id1Iu26FpOZgSFqK
    id1Iu26FpOZgSFqK
    bgPTsWYHJElkbeUh

    • Set the panels aside somewhere safe and bask in the beauty of your naked roaster.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kaffelogic

Mitglied seit: 23/07/25

2396 Reputation

0 Kommentare