PlayStation Vita Drahtloskarte tauschen

Geschrieben von: Brittany McCrigler
  • Kommentare: 22
PlayStation Vita Drahtloskarte tauschen

Schwierigkeitsgrad

Mittel

Schritte

11

Zeitaufwand

20 - 30 Minuten

Einleitung

Diese Anleitung zeigt, wie die Drahtloskarte in der PlayStation Vita getauscht wird.

  1. bXHPdJvmOqwnRZ5W
    bXHPdJvmOqwnRZ5W
    Kxh4sK2xMaaiHQtJ

    • Ausschalten und Speicherkarte entfernen.

    • Die vier 6,4 mm Schrauben auf der Rückseite mit einem Phillips #00 Schraubendreher entfernen.

  2. WwpKNcKBHnx3iwJP
    WwpKNcKBHnx3iwJP
    36FYDevnAqBvbNY3
    mjh2iFATaa2BKMEs

    • Öffne den Zubehörslot mit einem Fingernagel oder Spudger.

    • Entferne die zwei 5,4 mm Schrauben mit einem Phillips #00 Schraubendreher.

    Next time you ask me to use a spudger to open the dust cover of a port clearly meant to be user accessable with nothing but hands, I'll $@$* myself

    Ihateyoi -

    ps Vita rear panel have touch pad including

    Chintu LP -

  3. AH6yWSkBJ4VWv3RB
    AH6yWSkBJ4VWv3RB
    aXih4BBWrQN2fmOK

    • Entferne die zwei 5,4 mm Phillips #00 Schrauben an der Ladebuchse.

  4. bEJVmiEky4mHiDcb
    bEJVmiEky4mHiDcb
    aQOOn4pkOrVFR3hw
    vEQhcA4OEHFKVYLS

    • Trenne die Front- und Rückseite, indem du ein Plastic Opening Tool an der Seite des Gerätes einführst.

    • Vorsichtig um das Gerät herum gehen und aufhebeln.

    • Es sind immer noch Kabel vorhanden, die Front- und Rückseite zusammenhalten. Wenn du die Hälften auseinander reisst, wird dies das Gerät beschädigen.

  5. 3BBZJmwmjKVUDiJa
    3BBZJmwmjKVUDiJa
    EpjUlyY4L4GWcaLS

    • Vorsichtig die beiden Seiten trennen und auf die Batterie- und Touchscreen-Controller-Verbindungen, welche die Seiten zusammenhalten, achten.

    One of the shoulder buttons fell out when I was doing this step, along with the piece holding it in place. They go back in just fine when reassembling but make sure that they are oriented properly, of course.

    klung -

  6. NeowybD4slFqYmiM

    • Mit einem Spudger das Touchscreen-Controller Flexkabel vorsichtig lösen.

  7. DtebpV1FIAkm4AUj

    • Das Akkukabel vorsichtig mit einem Spudger lösen.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones -

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna -

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry -

    This component was far more stubborn than the screen connector when it came to removal. I opted for a smaller tool than the spudger (small flat-head) and managed to disconnect it after determining the best bit size for the job. Screwdriver is metal, obviously, so being gentle helps to avoid damaging anything.

    klung -

    broke the white part

    Benaya Miller -

    fried my vita on this step because the tip of me spudger is made of metal/steel/whatever. Guide never mentioned it has to be made of plastic

    hej95 -

  8. fkyIaVUrPDRIlhZV

    • Trenne Front- und Rückseite.

  9. vlXZZ4MfiNjWSFqf
    vlXZZ4MfiNjWSFqf
    sQ1gbc2E5BkZFX2R
    1HAJbEsQW1AOGbmI

    • Trenne die drei Stecker an den Antennenkabeln mit der Spudgerspitze ab.

    • Hole die Antennenkabel soweit heraus, dass sie der Fassung der Drahtloskarte sind. Biege sie aus dem Weg.

    Step 9-11 only apply to the 3G version of the PS Vita.

    logicj83 -

    Hello, I have the PCH-2001 model of the PS vita and the right analog stick went out. I ordered a replacement and the stick is slightly larger than the original. The original has a black rectangle on the back, the new version has the star version, which is what you have on this website as the replacement part. Any help here would be much appreciated. Thanks.

    Ben Ragains -

    Can I install a WiFi motherboard on a 3g ps vita model 1100?

    fmind11 -

  10. yKBmQZ5D12sRhGXX
    yKBmQZ5D12sRhGXX
    JH6WVtknwNbxKhD5

    • Hake den Spudger unter die Lasche an der Fassung der Drahtloskarte und löse die Lasche.

    • Löse die Fassung ab und entferne sie.

  11. JutjPPe6MLOg26PI
    JutjPPe6MLOg26PI
    jerqgQIbknJfbPur

    • Entferne die beiden 4,4 mm langen Kreuzschlitzschrauben #00 von der Drahtloskarte.

    • Die Drahtloskarte sollte ein kleines Stück herausspringen.

    • Ziehe die Drahtloskarte ganz heraus.

    My screwdriver does not want to unscrew those. They won’t turn at all.

    Rei -

    My screwdriver does not want to unscrew those. They won’t turn at all.

    Got the same, used PH #0 and grabbed wireless card casing with fingers from the top to release pressure on screen and avoid (possibly) breaking it.

    Yuriy Zhyromskiy -

    Some PS vita models seem to use a T2 screw instead of a PH#00. I’ve encountered this twice now.

    kaosjr kaosjr -

    I replaced de wifi card but is still difficult to connect to wifi. Could it be the wifi antenna? which cable model is it?

    Fernando Diaz -

    3G Vita 1000.

    I found that the PH00 head wouldn't actually fit in to the screw correctly. A PH000 fit but was still requiring a bit more force than seemed necessary. Also the card did not pop up when the screws were released and that's because Sony used a tacky pad under the card so needed a bit of prying up to get the angle.

    Paul Pimm -

Abschluss

Um dein Gerät wieder zusammenzubauen, folge den Schritten in umgekehrter Reihenfolge.

Tinte & Feder

Brittany McCrigler

Mitglied seit: 05/03/12

90749 Reputation

5 Kommentare

i am takig my vita apart (moving all boards/chips into new oled lcd screen/ front part) and am having trouble taking the wifi chip out in order to take out the right button board, the screw closest to the right button board is i think stripped, is there an easy and non harming way to the motherboard of taking that screw out?

Saul Calderon -

Rubber band .

Duck -

umm, just took mine apart and there isnt a card nor a card holder.... what?

Joe The total Lord -

Then you have the Wi-Fi only version. Only the model with the 3G modem actually has that slot. This part is the 3G modem module. The actual Wi-Fi chip is on the mainboard not as a separate module.

ccfman2004 -

Ask if I got this card and I can build a console without that module. Ask if I got this card and I put together a console without that wifi module, can the console work?

Fernando Olivares -