Razer Naga V2 Hyperspeed Programmable Button Panel Replacement

Geschrieben von: Brianna The Fixer
  • Kommentare: 4
Razer Naga V2 Hyperspeed Programmable Button Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

10 minutes

Einleitung

In this guide, we will show you how to safely replace the thumb button grip on your Razer Naga V2 Hyperspeed Wireless Mouse.

The 12-button grip is on the right side of the Razer Naga V2 Hyperspeed. It is mainly used for any shortcuts that the user might need. By using Razer Synapse, if your Razer Naga V2 Hyperspeed is experiencing issues involving.

Common Causes

  • Dirty or Misaligned Contacts
  • Damage Hardware
  • Electric Hardware
  • Faulty Switches
  • Driver or OS Issues

This guide will walk you through each step of the process for safely replacing the 12-button thumb grip. Please proceed with caution and work carefully.

  1. OcfQTUKIbIWriDLJ
    OcfQTUKIbIWriDLJ
    4UKxQOQcwMDgUdA1
    GCERgZrHHFNORyYi

    • Take off the top panel and remove the dongle.

  2. w6RqOjfgAHjuCnKI
    w6RqOjfgAHjuCnKI
    LBM4It6GY12JEP1V
    qnoIAMerqoY2SIlV

    • Heat the mouse feet and remove them with an opening tool or pick.

    • Reapply adhesive to the feet before reinstallation if you're reusing them.

  3. Y5ytNZjSs3YFhiPY

    • Use a T6 Torx screwdriver four screws on the underside of the mouse.

  4. TohdmTX3HWUTZIfl
    TohdmTX3HWUTZIfl
    Rj1TnyplHiKyZlJG
    2aUn3QB2xRGNhOAs

    • Use the iFixit Opening tool to help remove the top middle part as well as the right side.

  5. DVnMUAyy1lVAOnFg
    DVnMUAyy1lVAOnFg
    2gpBAVilJajqkdC2

    • While taking off the middle shell, carefully disconnect the battery compartment connector.

  6. HCHrKZG64eyaG5jU

    • Disconnect the programmable button panel connector.

  7. gOOQUuYYol6iNmGn
    gOOQUuYYol6iNmGn
    CGBtS1qWW3QUlgfS
    hXy1mvcvUhdOVEN5

    • On the left panel remove the four 3 mm-long Phillips screws on the button panel.

  8. Ik4af5oIWaAIAqDo
    Ik4af5oIWaAIAqDo
    POYrivpbSyEVXENH

    • Use the iFixit opening tool to pry the circuit module off and carefully remove the circuit module with precision tweezers (dull).

    What micro switch does it use? I need to replace all those in my razer. I need the mm measurements

    Edwin Baruc Morales Zambrano -

Abschluss

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Tinte & Feder

Brianna The Fixer

Mitglied seit: 25/09/25

453 Reputation

3 Kommentare

What micro switch does it use? I need to replace all those in my razer. I need the mm measurements.

Edwin Baruc Morales Zambrano -

how does the last part separate? what is the purpose of cleaning the buttons, if you leave them stuck together with coca-cola? You stopped at the hardest part. is this because you also could not separate them ? do they break if you go further? logic? sticking buttons. leave them together, makes sense i get it you now go buy a real mouse that is the lesson. very well done. I have learned my lesson. buy better. Thank you oh wise ones

JasenFromBoston -

confusions say disassemble so no one else must suffer. then Danielson, buy better!

JasenFromBoston -