Shark RV912 EZ Front Bumper Replacement

Geschrieben von: Zane Munsinger
  • Kommentare: 0
Shark RV912 EZ Front Bumper Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 - 10 minutes

Einleitung

The front bumper on the Shark RV912 EZ helps the robot detect obstacles and navigate properly. If the bumper is damaged or unresponsive, the robot may collide with objects or fail to turn. This guide will show you how to safely remove and replace the front bumper.

  1. iAZfBwPQBvuXJDim

    • Flip the robot over and power it off.

  2. jF4lDf5JsNrJcoZM

    • Use a Torx Security TR8 screwdriver to remove the five 9.6 mm screws securing the bumper.

  3. hIUS53EIgUiFOdo6

    • Flip the robot upright, then lift the bumper and pull it toward you to remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Tinte & Feder

Zane Munsinger

Mitglied seit: 25/09/25

469 Reputation

0 Kommentare