Einleitung
Grundständige Anleitung
Werkzeuge
Ersatzteile
-
-
Entferne die beiden Torx T8 Schrauben, welche die obere Halterung an der Festplatte befestigen.
-
Entferne die obere Halterung von der Festplatte.
-
Abschluss
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
I am swapping the original drive for another Western Digital one but the plug in on the new drive is not cut out for the key. Can I use this drive. Maybe trim the key off?
Lighthaded1 -
You can, if you are certain the socket is correct for the cable.
Arthur Shi -
I have this exact model iMac, but the thermometer fitting on the factory HDD is the completely different, positioned to the left of where your socket ends, and has two horizontal rows of four pins. Can anyone advise where I can find a reference of pin-outs of different apple drives?
Mark Mak -