iPad 10 Chip ID

Geschrieben von: Arthur Shi
Veröffentlicht: 02/12/22
  • Kommentare: 5

iPad 10 Chip ID

Veröffentlicht: 02/12/22

Teardown

Einleitung

Diese Anleitung enthält eine Auswahl von Fotos und eine Zusammenfassung der Chip-Identifikation für das iPad 10 Logic Board.

"Herzlichen Dank an unser Community-Mitglied CChin für seinen Beitrag!"

  1. NDIAgW3LqUNr6qeB
    NDIAgW3LqUNr6qeB
    5NKeEm4msqqsAQfP

    • Chip ID Teil 1:

    • Apple APL1W01/339S00803 A14 hexa-core Anwendungs-Prozessor, unter SK hynix H9HKNNNCRMMVFR-NEH vermutlich 4 GB LPDDR4X SDRAM Speicher

    • Kioxia K5A2JW30I8TAI2217 ? 64 GB NAND Flash

    • Apple APL1094/343S00564 Energie-Management

    • Apple APL1099/343S00565 Energie-Management

    • Texas Instruments SN2610A0 Akku-Ladechip

    • Broadcom BCM15957A0 Touchscreen-Controller

    • Texas Instruments CD3217B13 USB-C Controller

    Hi bos, may i know the code for mosfet on this ipad?

    Hairul Aiman -

    Does anyone know what the component is to the directly BELOW the Green outline

    (Apple APL1099/343S00565 power management)

    It is the larger size, SQUARE light Grey component, approx 5mm x 5mm in size. Only has two pads on bottom. I do not know what this component is, appears to be a smd inductor coil but I would like to find replacement.

    On another diagram online, it showed it was location x20129, not sure if that is helpful at all.

    Thank you.

    Shawn Z -

  2. MIYEjTab3gFn6nTq

    • Chip ID Teil 2:

    • Audio-Verstärker für Analoggeräte MAX98709B

    • Winbond W25Q80DV 1 MB serieller NOR Flash-Speicher

    • Apple/Cirrus Logic 343S00377 Energie-Management

    • Vermutlich Texas Instruments USB 2.0 dualer Repeater

    • Texas Instruments LM3638 Treiber für das LED-Rücklicht

    • Texas Instruments TPS61230A 6 A / 5 V Aufwärtswandler

    • Texas Instruments SN1705004A0 DC-DC-Wandler (vermutlich)

  3. GZGi4Nn3fPaYFQdv

    • Chip ID Teil 3:

    • Texas Instruments TPD4S311A Schutz für USB-C-Anschluss

    • Texas Instruments TVS2200 Schutz vor Spannungsspitzen

    • Nexperia 74AVC1T45 Zweifachversorgungs-Spannungswandler/Transceiver

    • Nexperia LSF0101 1-bit Mehrfach-Spannungswandler

  4. JUpdIYRrWI5m2X2e

    • Chip ID Teil 4 - Verbindungen:

    • NXP Halbleiter SN210 NFC-Controller mit Sicherheitselement

    • USI 339S01015 WiFi/Bluetooth-Modul

  5. QxUUjkpfLAJBdWvU

    • Chip ID Teil 5 - Sensoren:

    • Bosch Sensortec BMI282 6-axis Geschwindigkeitsmesser/Gyroskop

    • Bosch Sensortec Drucksensor

    • Alps Hall-Sensor

Tinte & Feder

Arthur Shi

Mitglied seit: 03/01/18

327072 Reputation

3 Kommentare

this iPad get water damage and it would just turn on apple logo and turn itself off,

Neclus ADams -

keep in mind l did a factory restore or tried to install the operating system and it didn't work

Neclus ADams -

My ipad is at dead battery, Im trying to charge it but its not working. Only showing the charger logo and a low battery icon. What do you think is the problem? The repair man says its the charging IC and the eemc, can somebody tell me what does eemc means?

Mike -