Introduction
This guide will cover how to replace the windshield wipers in a 2019 Chevrolet Colorado.
The guide covers how to take off the windshield wipers as well as how to reinstall the wipers. This is a truck so some may need to use a step stool in order to reach the wipers depending on how high your truck is raised.
This is a fairly easy task that only requires your hands to disassemble and reassemble.
Before you start this guide make sure your truck is off, parked, and on a flat surface just to ensure that you are completing this guide in a safe manner.
Parts
-
-
Disconnect the blade on the driver side by pushing the small button down in order to release the wiper.
-
-
-
Slowly slide the wiper off of the wiper arm by pulling it back and away from the windshield.
-
The wiper arm is like a hook so make sure that you completely unhook the metal piece from the wiper blade.
-
-
-
Grab the 22" wiper blade and position it on the wiper arm so that it is hooked into places as well as flush with the arm.
-
-
-
Pull the wiper blade down with your right hand and slowly push with your left onto the wiper arm until you hear it snap back into place.
-
-
-
Repeat steps 6 and 7 on the passenger side wiper. Make sure you are using the 18" wiper for the passenger side replacement.
-
to reassemble your device, follow these instructions in reverse order
