Introduction
Tools
Parts
- 
                  
                  
- 
            
Using a plastic opening tool or a spudger, carefully pry the plastic bezel around the screen.
 
 - 
            
 - 
                  
                  
- 
            
Remove the four screws holding the display in place with a Phillips #1 screwdriver.
 - 
            
Carefully lower the display to rest on the keyboard.
 
 - 
            
 - 
                  
                  
- 
            
The display connector is located on the back and is covered by some adhesive tape.
 - 
            
Carefully peal the tape back
 - 
            
Once the tape is peeled back, you can lift the bar to disconnect the display cable.
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.