Altec Lansing BoomJacket Case Removal

Written By: Ryan Byrnes

Comments: 1

Difficulty

Easy

Steps

Time Required

5 - 10 minutes

Introduction

Are you trying to repair a part inside your speaker but need to first remove the case that surrounds the speakers? This guide will help you do just that!

Tools

Step 1

Using your hands, remove the pegs (4+4) from the front and back of the speaker.

Step 2

Remove the outer black rubber housing of the speaker.

Step 3

Remove the inner blue rubber housing from the speaker.

Step 4

Pull out the two black wire meshes using a metal spudger.
Be careful not to damage the metal casing.

Step 5

Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

Step 6

Using the size PH1 screwdriver remove the screws exposed from the rubber stoppers (4 + 2).

Step 7

Pull the case apart and you will be able to see all the components inside the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Byrnes

Member since: 12/04/17

848 Reputation

One comment

Can you buy the black rubber case by it’s self

David O Connor -