Introduction

The following steps will document the process of replacing a Broan-Nutone range hood filter (Broan EW4830SS). There are not many steps involved, and the whole process should be completed within a few minutes. The only thing needed for this fix is a paper towel, which isn’t imperative to have, but it helps with the cleaning part of it. While doing the fix, make sure the stove is off as it is a safety hazard which can lead to possible injury if left on.

  1. SMJWaHlF6RLejKkJ
    SMJWaHlF6RLejKkJ
    wMmMdharbVVJRLiw
    • Turn on the range hood light to see better during the fix.

  2. lqPRfPgfkg5Z5XrY
    lqPRfPgfkg5Z5XrY
    MKGSKImWWwYlNEVI
    • Remove the old filter by pulling it down as you press the button.

  3. QVkilWNeyW2CUocm
    • Wipe down the area with a paper towel to clean any grease or other residue.

  4. QiVAEPyqE3Rt3NNq
    QiVAEPyqE3Rt3NNq
    YnCvAd21P6YSvIRe
    • Insert the new filter and make sure it is lined up correctly to fit.

  5. 2h1cXBmWsbNGhFFE
    2h1cXBmWsbNGhFFE
    13MUuJRLuav1RXLy
    • Turn off the light.

  6. SaCXXNCAZ3TAXMN5
    SaCXXNCAZ3TAXMN5
    KJWxvKFHuQElPhJY
    • Turn on the range hood to see if it is working correctly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Omar Dirie

Member since: 18/01/22

133 Reputation

0 comments