Canon PowerShot A540 Back Cover Replacement

Written By: Carley Fuller
  • Comments: 1
Canon PowerShot A540 Back Cover Replacement

Difficulty

Easy

Steps

5

Time Required

5 - 10 minutes

Introduction

  1. mItqjh2IpZFdYgG1
    mItqjh2IpZFdYgG1
    fRbCCFgV1khva1Yq

    • Turn off the camera.

    • Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

  2. PCKUMCrADGUNOIOq

    • Turn the camera upside down to view the "Card/Batt. Open" Cover.

    • Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

  3. FrARZrsAitm3USOj

    • Open "Card/Batt. Open" Cover.

    • Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

  4. C32Ry1FsUJOoPnlq

    • Turn the camera to the right side of the LCD screen.

    • Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

  5. Gi2KgRmMsEIgrTfC
    Gi2KgRmMsEIgrTfC
    GqppF2J2LTxaxInG
    ewnOLvKLC2ltGXUl

    • Gently remove the back cover.

    • Start at the bottom at the corner of the "Card/Batt. Open" Cover.

    • Then move onto the other edges and the top.

    • It may be tight at the top!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carley Fuller

Member since: 23/03/15

410 Reputation

One comment

Mon écran arrière es craque et ne fonctionne plus mais le reste fonctionne très bien,

ma question es ou je peut me procurer un écran PowerShot A540

jmucienko@sympatico.ca

Jocelyn Mucienko -