Casio Cassiopeia E-125 Touch Screen Replacement

Written By: Ryan Fernandez
  • Comments: 0
Casio Cassiopeia E-125 Touch Screen Replacement

Difficulty

Moderate

Steps

11

Time Required

10 - 15 minutes

Introduction

If the touchscreen of your Casio Cassiopeia E-125 has been damaged or broken follow this guide to replace it.

  1. KLDJQLQhLeCmGAVG

    • Flip the device over to the back side.

  2. 2cXMFEyxRl22yVOF

    • Slide the small switch on the back to "MAIN".

  3. ZeoZdJZCZd3kP1KH

    • Slide the battery cover downwards.

    • Pull off the battery cover.

  4. vvhNYLZSAG6KQmuZ

    • Pull the black tab to remove the battery.

  5. ou5PYWFtIxEvA6RE

    • Use the Phillips #00 screwdriver to remove the two screws near the top of the device.

  6. UjdpAZduafiJ2DYi

    • Use the Phillips #00 screwdriver to remove the two screws located inside the battery compartment.

  7. rtTLvPNQsjJFBdtU

    • Use a spudger or opening tool to separate the two halves of the case.

  8. EJoFPiEXWVtKXJt1

    • Pry the two halves of the case apart with the opening tool.

  9. pnB5HBdXvmKoDxUp

    • Potential for device damage. Do not pull apart the wires connecting the outer case.

    • Lay the two halves of the outer case next to the central components as shown.

  10. xIZfIMPZgDP6vHIg

    • Use the Philips #00 screwdriver to remove the three screws in the corners of the screen.

  11. gdQBjqCQQxJKbc13
    gdQBjqCQQxJKbc13
    vhyTZVaJkDtvArUk

    • Lift the tab on the motherboard and pull out the ribbon cable.

    • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Fernandez

Member since: 03/04/12

47 Reputation

0 comments