Dell Inspiron 9100 Fan 2 Replacement

Written By: charlierefvem
  • Comments: 0
Dell Inspiron 9100 Fan 2 Replacement

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

This guide requires a Phillips #00 screwdriver

  1. upxAZfscjOTUJxcg
    upxAZfscjOTUJxcg
    f6GlscBMwnPOLksp
    JUVDyF1xe5dSmeAA

    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

  2. raNWvbMDkgVgwwwH
    raNWvbMDkgVgwwwH
    lU3mY6pOorH1Aq5C
    1Ip5kqPYCLN1RmHl

    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

  3. rfLU3A2jNT2VEG2Z
    rfLU3A2jNT2VEG2Z
    ndrwNTuCkAMMdVDA

    • Undo the two screws on the fan cover labeled "F2"

    • These screws will remain in the panel

    • Remove cover plate.

  4. BZ6eaDDVOCjCOrqR

    • Remove the single 6mm screw holding the fan in place.

  5. PweHIpRjDEeNCjCJ
    PweHIpRjDEeNCjCJ
    FpFJCUwLGJBhAeph

    • Flip the handle up.

    • Use the handle to pull the fan away directly up, away from case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

charlierefvem

Member since: 12/01/11

854 Reputation

0 comments