Dexter 900W Corded Hammer Drill - 900ID2.5 Orange Button Replacement

Written By: Céline Chemineau
  • Comments: 0
Dexter 900W Corded Hammer Drill - 900ID2.5 Orange Button Replacement

Difficulty

Very easy

Steps

6

Time Required

2 minutes

Introduction

By the end of the guide you will have replaced the orange button

  1. worX2CINggcWocAT

    • Before you begin, remember to disconnect the mains plug.

  2. BSjXFedFMnHax5Xf
    BSjXFedFMnHax5Xf
    B61mFgjvXNaTlYCW

    • Remove the handle from the machine.

  3. 15ZJca1uYbMPWQnC
    15ZJca1uYbMPWQnC
    b1MMpgcnU1LRnyql

    • Using a screwdriver or screwdriver, unscrew and open the device.

  4. SLoKWWeaWW2KP6Lw
    SLoKWWeaWW2KP6Lw
    REkKnON1cRGAZTbC

    • Remove the orange button then replace the new one.

  5. bkBVtkhjR3U5RyHc
    bkBVtkhjR3U5RyHc
    26o4bYdKY2CJIG1G

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Tighten the screws to close the device.

  6. hliBhGCvjH5wfZty
    hliBhGCvjH5wfZty
    3fevhUCMkUMUxPDj

    • Finally replace the handle

Conclusion

To reassemble preform steps in reverse order.

Author

Céline Chemineau

Member since: 29/01/20

16497 Reputation

0 comments