Introduction
Dishwasher stopped washing. No pump sound. Display goes from Active to Clean in about 1 minute.
Tools
-
-
Take out filter: left turn the cylindrical filter, take out the silver flat filter, drain water with sponge or turkey baster. Then remove white plastic part front/right by pulling out the long latch horizontally with pliers and then pull the plastic up.
-
-
-
That gives access to the impeller. Make sure it is not blocked. In my case there was a broken piece of glass that blocked it. Make sure it turns freely.. Replace everything - should work now.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
