Fujifilm FinePix S1 LCD Screen Replacement

Written By: Brandon Benavente
  • Comments: 0
Fujifilm FinePix S1 LCD Screen Replacement

Difficulty

Moderate

Steps

6

Time Required

20 minutes

Introduction

Following this guide involves the Fujifilm FinePix S1 and is moderately difficult.

  1. cxF4EvM1OZFKl2As
    cxF4EvM1OZFKl2As
    EPHxkoArHJRtPYYj
    Sv6vbLQ21VulELCC

    • Remove the 4 screws surrounding the LCD screen.

  2. R6AGMrjdIYdQhSII

    • Use an opening tool to remove the casing on the hinge of the LCD screen.

  3. MeZPDDAJJeokDTSU
    MeZPDDAJJeokDTSU
    BJWcq4FhBHW1kjXO

    • Use an opening tool to pry apart the LCD screen casing and remove the casing.

  4. NhIn2cSGTbLcq514

    • Remove the 2 screws located on the inner corners of the inside of the LCD screen.

  5. GgurQTkA5qkS6Z45
    GgurQTkA5qkS6Z45
    BZCstGjwhegJ2vjL

    • Disconnect the blue cable set by carefully prying it off with a spudger.

  6. AHCyTAkkyTXFYnxj
    AHCyTAkkyTXFYnxj
    STkAwYlAOy1marEy

    • Use a spudger to lift the LCD screen out of its placement and remove it from the casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brandon Benavente

Member since: 15/02/16

677 Reputation

0 comments