GameSir T4 Pro Battery Replacement

Written By: Madison Puckett
  • Comments: 0
GameSir T4 Pro Battery Replacement

Difficulty

Moderate

Steps

4

Time Required

5 minutes

Introduction

Use this guide to remove the battery from your GameSit T4 Pro controller. All you need for this repair is a Phillips #1 screwdriver and the iFixit opening tool. For the battery replacement, this controller requires a 600 maH battery. Complete this repair guide before continuing to the other repair guides.

  1. EKYDuOuhGH3IVs2m

    • Using the Phillips 1 screwdriver, gently turn the screw to the left (repeat this step until all four screws are taken out).

  2. Z253w1hw1YAOjJxm

    • Use your iFixit opening tool to break the seam of the back of your controller.

    • Be careful when pulling apart, as the charging port wires are connected to both sides of the controller.

  3. jUg1fYhBZi5jeRCv

    • Using the plastic spudger, wiggle the connection out of place.

  4. eFTIEf6Ls2hFPq6f

    • Apply a slow, but consistent pull to the old 600 maH battery.

    • Attach new battery onto the pad

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Madison Puckett

Member since: 16/09/22

680 Reputation

0 comments