Introduction

This guide will thoroughly explain how to easily repair a zipper that is broken. No special requirements needed; just needle-nose pliers, scissors, and a needle and thread!

  1. i6KTkRVAGmkBmBYl
    i6KTkRVAGmkBmBYl
    upKBPQVGIIGi4hiA
    cvxVIiht6aSgNWGi
    • Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper.

    • Zip the zipper all the way down to the last set of teeth.

  2. EKQ4HZ6b2GqYYTGn
    EKQ4HZ6b2GqYYTGn
    3mMQ62nHlEDRcWxC
    RHyHjJqSTq25wBTD
    • Align both sides of the zipper evenly and slip the zipper back on track.

  3. fVfULMrqXZicAWQo
    fVfULMrqXZicAWQo
    DDqfFu2FyE4yQoDE
    VZp3dbbdZxEHjtBo
    • Start zipping up the zipper to make sure it has been aligned properly.

  4. CbiDbXdJuQOnLr2e
    CbiDbXdJuQOnLr2e
    VtmGjEjADHslXwC6
    gOVasdLfimAXitMW
    • Thread the needle.

    • Sew up the area where the metal or plastic stopper used to reside.

  5. cZJOGjsZQ6XJIVpG
    cZJOGjsZQ6XJIVpG
    jJIQ63JjXDgSdT1L
    UyQTTmslVNIsPXZ5
    • Tie off what has been sewn by making a knot in the thread.

  6. w6PwpYjc6gvOceeT
    w6PwpYjc6gvOceeT
    rftPJkcZpe4Iqubh
    • Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off.

  7. WHZJuiRdljmgfT61
    WHZJuiRdljmgfT61
    1qHNBA3OMTLCSSPf
    UIUIVO2qrCWsLPDN
    • Zip up the garmet to make sure everything is working properly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katalina Holbrook

Member since: 02/06/17

506 Reputation

One comment

Not helpful. Suppose if the slider part broke and is now now. Now what?

Walter Nagel -