How to Install LED License Plate Lights

Written By: Eric Wu
  • Comments: 1
How to Install LED License Plate Lights

Difficulty

Very easy

Steps

5

Time Required

15 minutes

Introduction

If you wanted to change out your license plate lights, installing new LED license plate lamps is actually quite a piece of cake. You will have a new look with minimal effort in no time. This installation will not take much time and is great for beginners.

  1. joIObKlKNC2DVyVK

    • You can choose to raise your car with a car lift jack to get better access to the license plate area. This is not absolutely necessary, but will make installation easier.

  2. oDn2LtHWpWQWurwX
    oDn2LtHWpWQWurwX
    PZrIsotWE4IoOPpB
    scbPMTpqFYOreKXT

    • Pull out the license plate lamp assembly and remove the stock license plate bulb.

  3. LJfqCfDJasVCrsou
    LJfqCfDJasVCrsou
    LcDeGaFZc1SPPqKM

    • Install back the new LED license plate bulb.

    • Test to make sure the LED bulb works.

  4. XOJW5eTkGBDIkZ2p
    XOJW5eTkGBDIkZ2p
    krh4sBHVKRGtbTlA

    • Put the license plate assembly back and repeat on the other side.

  5. sk2MfvwGaIOVVsc1

    • Once everything works, you can enjoy your new LED license plate look.

Conclusion

See how easy installing these LED license plate lights are? It's almost unbelievable how a quick and simple installation could make such a difference.

Author

Eric Wu

Member since: 22/01/15

3267 Reputation

One comment

Why do all your pics have such obnoxious watermarks? If the pics are specifically for iFixit.com I would remove the watermarks.

David Spalding -